Views: 0 Author: Site Editor Publish Time: 2021-06-15 Origin: Site
With the development of the manufacturing industry, the glue spreading machine is more and more widely used in the field of plywood production. The use of the glue spreading machine provides convenience for the gluing operation, realizes the mechanization of plywood production, and understands the treatment methods for common problems of the glue spreading machine. Today we will understand the correct operation and daily maintenance of the glue spreading machine.
First of all, the glue spreading machine should be placed on a stable load-bearing platform, which is a platform that can bear more than 100KG, so as to prevent the platform from being unable to carry the weight of the glue spreading machine and damaging the glue spreading machine; second, it is necessary to maintain the glue application environment Clean, dry and ventilate to ensure that the glue applicator functions under normal working conditions; third, the voltage and current of the glue applicator should be stabilized at 220V to avoid voltage instability causing damage to the glue applicator's parts; finally, After each use of the glue spreading machine scraper, the knife edge should be separated and cleaned immediately to keep it smooth; pay attention to raising the scraper to a higher position after the work is completed to avoid the tension drop caused by the long stretch of the spring.
The plywood machine manufacturer reminds that if an abnormality is found in the glue spreading machine, contact the manufacturer in time to understand the cause of the abnormality, and then repair it.
After understanding the daily maintenance of the glue spreading machine, let's take a look at the safe operation of the glue spreading machine and what needs to be paid attention to.
Generally speaking, industrial glue will have a slight irritating odor, so it is necessary to keep the glue application place well ventilated so that the irritating odor can be emitted. In addition, the start-up of the glue applicator should follow the following sequence: check the power-on circuit and other hardware of the equipment-adjust the distance between the two rubber rollers above-install the rubber baffle-pour the glue-turn on the power. In addition, during the operation of the glue spreading machine, glue is indispensable on the rubber roller. It is estimated that when the downtime is more than 30 minutes, it is necessary to clean up and remove the remaining glue in the glue spreading machine in time. It must not be forgotten that if there are flakes wrapped around the rubber roller and need to be removed, stop the machine first, and then use the blade to cut. When cutting, pay attention to the knife edge outward and point the back of the knife toward the rubber roller to avoid the knife edge from cutting the rubber roller.
The above is part of the contents of the safe operation of the glue spreading machine. We must regulate the operation of the glue spreading machine in production, and hope that these contents can help you in your future production.