Precautions for the dry operation of the cutter grinder

During the operation of the cutter grinder(knife grinder), some dust will inevitably be generated. Therefore, dust removal measures must be taken during the use of the cutter grinder(knife grinder), so as to ensure the use effect of the cutter grinder(knife grinder), but the specific characteristics of the cutter grinder(knife grinder) How does the dust removal and cleaning operation need to be done?

When cleaning the cutter grinder(knife grinder), the operator should clean up the work site every day when going to work, keep the working environment of the cutter grinder(knife grinder) tidy, check according to the provisions of the equipment check card of the cutter grinder(knife grinder), and observe according to the lubrication chart. The lubrication of each lubrication part, and add oil that meets the oil quality requirements according to the regulations; in addition, according to the lubrication manual of the cutter grinder(knife grinder) tool, the cutter grinder(knife grinder) should be replaced once a year and thoroughly cleaned Dirt in oil.

In addition, regularly remove the oil from all parts of the cutter grinder(knife grinder), clean the oil filter devices of the cutter grinder(knife grinder), and check the machine tool electrical appliances of the cutter grinder(knife grinder) at the end of each year to clean the dust and dust on the electrical control components in the electrical box of the cutter grinder(knife grinder). Dust, grease, oil, etc.

The new sharpener needs to be run dry before use, so that you can check out the abnormal problems that may occur in the use of the cutter grinder(knife grinder), and you can deal with and solve them in time. Today, let’s understand the precautions for the dry run of the cutter grinder(knife grinder).

Before the full-automatic cutter grinder(knife grinder) runs dry, it is necessary to ensure that the equipment fasteners during the dry run of the cutter grinder(knife grinder) are tight and not loose; in addition, the grinding length of the cutter grinder(knife grinder) should be able to change with the change of product specifications. Convenient adjustment and reliable locking, and to ensure that the sharpening angle of the sharpener should be easily adjusted as needed; and when the cutter grinder(knife grinder) is rotating, all parts should be coordinated and there should be no abnormal noise. 

In addition, we must also pay attention to the lubrication of the moving parts and working parts of the cutter grinder(knife grinder), and ensure that the lubrication system does not leak oil, so that the normal operation and safe operation of the sharpener can be realized.