Application Safety Issues of High-speed veneer stacker Machine

The application of high-speed veneer stacker machine is a very important machine in plywood veneer production line. The use of high-speed veneer stacker machine can better sort the boards. The use of high-speed veneer stacker machine has greatly reduced the labor requirements of the board production industry, while reducing labor costs, it can also improve the production efficiency of boards. However, these devices are large-scale equipment, which runs very fast. Application security must be guaranteed. Let's take a closer look at this information.

Before starting the high-speed veneer stacker machine, it is necessary to check whether the parts of the machine are damaged, and to ensure that the parts do not crack, excessive deformation and wear during the specified external load and time. The equipment must also have a certain amount of wear resistance and corrosion resistance, and its entire working system can achieve its overall function under specified conditions. The realization of the overall function is set by the functional principle, so whether the machine can work smoothly is closely related to the safety of parts in each part.

In addition, the use of high-speed veneer stacker machine can not pollute the environment, and to have a good degree of adaptation to the environment, such mechanical equipment is what we need.

In order to ensure the safety of the veneer stacker machine in use, this requires that the high-speed veneer stacker machine must be equipped with a safety device in use.

While installing the normal start-up and shutdown controls of the winder, a safety control device should be set up for emergency shutdown in case of an accident. According to this requirement, technical standards for safety devices for various woodworking machinery should be formulated. The domestically-designed woodworking machinery must be provided with a complete safety device at the same time as the supply, and supply the safety accessories required for maintenance, so that it can be updated after the safety protection device fails.

The use of woodworking machinery such as high-speed veneer stacker machine that lack safety devices or their failures should be prohibited or restricted in order to ensure safe operation. Such requirements are a guarantee for the safety of the operators and must be strictly observed by each user.

In the application process of the high-speed veneer stacker  machine, some application failures will affect the application of the board-receiving machine, so we must understand the cause of the relevant faults, and timely check and deal with it to ensure that the board-receiving machine operates normally.

In the application of the veneer stacker, an overtravel alarm is sometimes displayed when the alarm fault occurs. This indicates that the board retractor has reached the limit during operation. It is necessary to check whether the designed graphic size exceeds the processing range and check the motor of the woodworking machinery and equipment. Whether the connecting line between the shaft and the screw is loose. If so, tighten the screws. In addition, check whether the woodworking machinery and the computer are properly grounded, and whether the current coordinate value exceeds the soft limit value range.

 These are the places we should check when the alarm fault of the high-speed veneer stacker machine is generated, so as to ensure the normal operation of the winder. Ensure that the use of the product is excellent.

    The above content is what we need to do when using high-speed winder. Safe use of plywood production machines can ensure that our production is completed in an orderly and efficient manner.