How to reduce the noise in the use of veneer peeling machine

      Veneer peeling machine(Veneer peeling machine(rotary cutting machine)) is a kind of large-scale wood machinery. It is normal to have sound during its operation, but it will make relatively loud noise after using it for a long time. We should learn some techniques to reduce noise in the process of using Veneer peeling machine(rotary cutting machine). Operators have a quiet working environment.

      1. The veneer peeling machine(rotary cutting machine)should be placed on a relatively flat site, as much as possible on a flat concrete floor. This is because the various parts of the veneer peeling machine(rotary cutting machine) will make noise due to the inclination of the ground, which affects the working state of the operator.

     2. The problem of the bearing of the veneer peeling machine(rotary cutting machine). Bearings subjected to external shocks will overheat, and a lot of noise will be generated when the bearing continues to heat up. At this time, it is necessary to check whether the rotor of the motor is concentric. When the bearing of the veneer peeling machine(rotary cutting machine) is damaged, it will also cause the equipment to vibrate and generate noise.

     3. Check whether the spindle of the veneer peeling machine(rotary cutting machine) is loose. The loose spindle is prone to turbulence and noise.

     4. The reason for the blockage of the ring die of the veneer peeling machine(rotary cutting machine). It is necessary to regularly check whether there is foreign matter in the ring die equipment of the veneer peeling machine(rotary cutting machine). If there is foreign matter in the ring die, it will cause the blockage of the ring die and cause noise. Therefore, the ring die should be cleaned regularly, and the impurities in it should be cleaned in time after the work of the day is completed to facilitate the use of the next day.

     5. The problem of the veneer peeling machine(rotary cutting machine) coupling. To check whether the coupling is on the same horizontal line, its height must be calibrated to the same horizontal line, otherwise the equipment will have certain noise.

     6. Regular maintenance of veneer peeling machine(rotary cutting machine). After the equipment has been used for a period of time, it is necessary to carry out certain maintenance on the equipment, and apply lubricating oil to the shaft rotating part of the equipment, because the shaft rotating part has many friction times, and long-term use will generate noise.

     Through the above content sharing about reducing noise during the use of the veneer peeling machine(rotary cutting machine), a quiet working environment is created.