Views: 0 Author: Site Editor Publish Time: 2022-05-11 Origin: Site
Today, I will explain to you how to use the spindleless plywood veneer peeling machine correctly. Many people think that it is not difficult to use veneer peeling machine without a card shaft. This idea is not correct, the use of the spindleless plywood veneer peeling machine is very important, which will affect the output, quality, work efficiency and service life of your product. Therefore, it is very necessary to learn how to use the spindleless plywood veneer peeling machine.
What is the correct way to use the spindleless plywood veneer peeling machine?
When using a spindleless plywood veneer peeling machine, it is necessary to understand the production parameters of the machine. Only in this way can the spindleless plywood veneer peeling machine play its functions, and the raw-processed veneer can meet the high-precision requirements and produce high-quality products. .
This paper introduces a machine tool cutting current adjustment technology for CNC spindleless plywood veneer peeling machine. It is an important cutting process parameter, which directly determines the thickness and speed of the cutting veneer, and is also a very critical step in the processing process. If the production parameters of the veneer are not set properly, the production quality will be affected.
The cutting current selection method of the CNC spindleless plywood veneer peeling machine: the larger the cutting current of the CNC spindleless plywood veneer peeling machine, the greater the plasma arc energy, the higher the cutting ability, and the faster the cutting speed. Therefore, the operator should correctly select the cutting current and the corresponding nozzle according to the thickness of the material before cutting, which can ensure that the produced veneer is more in line with the needs of the user.
Precautions for using the spindleless plywood veneer peeling machine: 1. Before use, check to confirm that the motor and cable are normal, the protection grounding is good, the protection device is safe and effective, the saw blade selection meets the requirements, and the installation is correct; 2. After starting the spindleless plywood veneer peeling machine, It should be run with no load, check and confirm that the saw blade is running in the correct direction, the lifting mechanism is flexible, there is no abnormality and abnormal noise during operation, and everything is normal before production; 3. The operator of the spindleless plywood veneer peeling machine (rotary cutting machine) without a card axis should press the workpiece tightly with both hands to feed the material evenly , When pushing the CNC spindleless plywood veneer peeling machine, do not use too much force. Gloves should not be worn during operation; 4. The cutting thickness should be carried out in accordance with the regulations on the mechanical nameplate of the factory for the rotary cutting machine without a card shaft, and no ultra-thick cutting is allowed; 6. During the operation of the rotary cutting machine without card shaft, if there is impact, jumping and abnormal noise on the workpiece, it should be stopped immediately for inspection, and the work can be continued after troubleshooting; 7. It is strictly forbidden to check and repair the parts during the operation of the rotary cutting machine without the card shaft. Use special tools to clean up the debris in the saw table and the saw seam of the components in time, and do not pick or wipe it by hand; 8. After the work of the rotary cutting machine without card shaft is finished, clean the body, dry the saw blade, and drain the remaining water in the water tank. Take back the cable and store it in a dry and ventilated place.