Views: 0 Author: Site Editor Publish Time: 2021-08-12 Origin: Site
The correct operation process and steps of the plywood machine in the production process are very important, which can directly affect the production efficiency of the plywood machine and the quality of the product. The plywood veneer peeling machine is the main production equipment for wood processing. Next, let's take a look at the operation precautions of the plywood veneer peeling machine equipment in the production process.
The plywood veneer peeling machine is an automatic plywood production equipment, which can be divided into a spindle plywood veneer peeling machine and a spindleless plywood veneer peeling machine. These two types of peeling machines can peel wood of different diameters. It is necessary to pay attention to the length of the rotary knife to be 50mm longer than the distance between the two chucks during rotary cutting. The working feed speed is the distance that the knife moves per rotation of the chuck shaft. The feed speed determines the thickness and quality of the veneer. Between the two chucks of the machine The distance determines the length and width of the peeled log. The correctness of the above steps can affect the quality of the veneer, so the correct operation steps must be strictly followed.
Production efficiency and quality are important conditions for the development of a company. The peeling machine is a mechanical equipment for processing wood. It has high precision, simple operation, convenient maintenance, and long service life. There are many factors that affect the quality of the machine. We are required to strictly follow the process during operation so as not to affect the production schedule and product quality.
During the use of mechanical equipment, it is easy to cause wear, especially woodworking machinery. Today, take the plywood veneer peeling machine as an example to talk about the three elements of its wear. Let’s take a look at it together.
First of all, the chuck of the spindle plywood veneer peleing machine clamps both ends of the wood section, resulting in end loss, which causes the rotary cutter knife to become blunt, the rotary cutting speed is reduced, and the quality of the board is affected. Secondly, if the log is not round and the thickness is uneven, making the peeling discontinuous, it will also cause a part of the machine to wear. As far as possible, if there are untreated iron nails on the wood, it will have a certain impact on the use of the machine.
There are many factors that affect the wear of the plywood veneer peeling machine during the production process. Improper operation may be the direct cause. Therefore, the staff must first learn the relevant equipment knowledge and safety operation training when operating, and carefully check the status of each component before starting the machine. Whether it is good, whether the handle position is correct, whether the limit protection measures are intact, adjust the tightness of the belt conveyor chain, and then adjust the peeling thickness, and start the work. When the machine is working, it is strictly forbidden to adjust the mechanical parameters. If the machine fails, you need to Shut down and check in time. When the machine stops working, it is necessary to cut off the power supply to ensure that the shutdown is intact.
The plywood veneer peeling machine is the main production equipment in the production of plywood. The quality of the veneer is very important. Therefore, some operational matters should be paid attention to in the operation process in order to be better put into production.