Why is there noise during the use of the veneer peeling machine?

       We know that in the wood processing industry, if you want to process wood, veneer peeling machine(veneer peeling machine(rotary cutting machines)) equipment is essential. There are also many types of veneer peeling machine(veneer peeling machine(rotary cutting machines)s), such as spindle, spindleless, and now very popular CNC veneer peeling machine(veneer peeling machine(rotary cutting machines)s). Today we know about veneer peeling machine veneer peeling machine(rotary cutting machines).

       Veneer peeling machine(veneer peeling machine(rotary cutting machines)) is one of the main equipment for producing plywood. It is widely used in the wood industry. Like most machines, there will inevitably be small problems in long-term use, such as loud noise during work. Let me introduce to you why there is noise in the operation of the card veneer peeling machine(rotary cutting machines)?

       1. A problem that is prone to occur in veneer peeling machine(veneer peeling machine(rotary cutting machines)s) is the noise of the bearing in the continuous heating up of the bearing. The reason for this problem must be found out. The rotor of the motor and the rotor of the wood flour machine are not concentric, which will cause the bearing to bear additional load impact, which will lead to the overheating of the bearing, which will cause the bearing to make a lot of noise in the continuous heating.

       2. The ring die of the veneer peeling machine(veneer peeling machine(rotary cutting machines)) is blocked, or only part of the die hole is discharged. Foreign matter enters the ring die, the ring die is out of round, the gap between the pressure roller and the die is too tight, the pressure roller is worn or the bearing of the pressure roller cannot be rotated, which will cause mechanical vibration (check or replace the ring die, adjust the pressure roller gap).

       3. The coupling of the veneer peeling machine(veneer peeling machine(rotary cutting machines)) is unbalanced in correction, there is a deviation between the height and the left, the machine will vibrate, and the oil seal of the gear shaft is easily damaged (the coupling must be calibrated to the horizontal line).

       4. The main shaft of the veneer peeling machine(rotary cutting machines) is not tightened, the loosening of the main shaft will cause the axial back and forth movement, the pressure roller swings obviously, the mechanical noise and vibration are large, and the work is difficult (the butterfly spring and round nut at the end of the main shaft need to be tightened).

       If the problems that occur in the operation of the veneer peeling machine(rotary cutting machines) are not dealt with, it will directly affect the normal operation of the veneer peeling machine(rotary cutting machines) equipment. Therefore, in order to ensure the working efficiency of the veneer peeling machine(rotary cutting machines), we must pay attention to the inspection before use, and pay more attention to the maintenance in daily life.