Veneer is usually made in three ways, veneer rotary cutting, veneer planing and veneer sawing.The most widely used is rotary cutting. Wood is processed into veneer by rotary cutting machine(veneer peeling machine). The veneer produced is mainly used for plywood production.The rotary cutting is the m
The quality of veneer production determines the quality of plywood. Therefore, the production of veneer is often important in the production of plywood. In addition to the veneer rotary cutting, the veneer drying of the veneer is also a very critical link. Let ’s take a look at the problems that ari
After the veneer is dried by the veneer dryer, the veneer is evaluated in terms of shrinkage, deformation, moisture content and its distribution.First talk about the shrinkage and deformation of the veneer. Wood can absorb a certain amount of water, and the size of the wood will change due to the mo
The veneer after being cut by the rotary cutting machine (veneer peeling machine)contains a large amount of moisture. In the production of plywood, the veneer generally requires a lower moisture content. Therefore, the veneer after rotary cutting should be dried by a veneer dryer to make the moistur
Generally speaking, the vast majority of trees, through the veneer peeling machine(rotary cutting machine )and other plywood production line processing, can produce plywood veneer. Not all trees can produce qualified plywood after processing.Therefore, in the industry of plywood production, we need