Views:16 Author:Site Editor Publish Time: 2019-12-11 Origin:Site
Plywood veneer peeling machine A machine for processing wood segments of a certain length and diameter into veneer for plywood and other artificial boards. The main technical parameters of the rotary cutting machine are the maximum length and diameter of the wood segments that can be processed.
Plywood veneer peeling machine is one of the main equipment for producing plywood. Veneer peeling machine is divided into spindle veneer peeling machine, and spindle-less veneer peeling machine, spindle veneer peeling machine is suitable for large diameter wood, and spindle-less veneer peeling machine use is used for small diameter wood.
With the development of science and technology, servo numerical control technology has also been applied to the production of veneer peeling machines. In recent years, CNC plywood veneer peeling machines have appeared. The emergence of CNC plywood veneer peeling machine not only improved the quality and accuracy of the production of veneer but also greatly improved the production efficiency and the degree of automation of the whole machine. CNC spindle-less plywood veneer peeling machine is an important equipment for plywood production line or veneer production line. It is mainly used to cut wood segments with different lengths and wood cores within a certain diameter range into veneers of different thicknesses with a small diameter.
CNC plywood veneer peeling machine is a mechanical equipment for the automatic production of veneer. Compared with traditional wood processing equipment, it can effectively improve the production quality and accuracy of veneer. The machine has a higher production efficiency and automation degree and can process different diameters. Wood, effectively reducing the waste of wood.
For equipment such as CNC plywood veneer peeling machines that are prone to wear and tear on wood processing, in order to ensure the quality and accuracy of the production of the board, the correct operation method is essential. When operating the machine, it is necessary to strictly follow the operating rules and regulations. Machine components and performance control. To clean up the surface and the interior of the equipment in time to avoid affecting production, the cutting process parameters need to be set before operation. The parameters cannot be adjusted during the machine operation, and the components are regularly lubricated and maintained. In order to avoid the lack of oil under high-intensity work and cause machine wear.
In the production of many woods nowadays, the production of CNC veneer peeling machines is inseparable. The use of this equipment effectively improves the quality and accuracy of veneer production, and it has a wide range of uses, and you can meet the needs of users.
Veneer peeling machine is the main tool for processing wood, and with the birth of CNC plywood veneer peeling machine, it has saved the manpower to the greatest extent and reduced the cost of production. Although it is numerically controlled, there are still some matters needing attention in the process of use for safety and smooth production, so today we will briefly understand what restrictions should be paid attention to when using CNC veneer peeling machine.
1. The rotary cutting machine can only be used for the designed purpose, do not use it for other purposes, such as rotary cutting rubber, plastic, etc., because its design function does not have these uses.
2. When setting the minimum machining residual amount, the minimum set value cannot be less than 30mm, otherwise, it will easily cause collision failure during work.
3. When setting the stop point, the upper limit of the set value cannot exceed the maximum stroke of the equipment, and the lower limit cannot be less than the set value of the machining residual amount, otherwise, the machine cannot work.
4. The rotary cutter should be used within the range of use specified by the technical characteristics.
These influencing factors are constraints, but also a guarantee of safe and smooth production! So the necessary code of conduct when using the veneer peeling machine still needs to be followed.