NEWS CENTER

The quality of plywood is related to the quality of the veneer. So how to judge the quality of plywood veneer? The quality standards for evaluating the veneer are as follows: the thickness deviation of the veneer, the cracks on the back of the veneer, the smoothness of the back of the veneer and the

The veneer stacker is a machine used in the plywood industry. Veneer stacker is usually used after veneer rotary cutting machine . The automatic veneer stacker (take-up) machine uses a chain mechanical operation, automatic ear insertion, automatic feeding during operation, and spray-synthesis

一、The veneer peeling machine is stuck.When using the veneer peeling machine, the veneer peeling machine is stuck. What is the reason? In such a situation, the machine must first be stopped and the power switched off. Then check what causes it. This usually happens, you need to check the following pl

CNC veneer peeling machine is one of the main equipments for producing plywood. It is a non-chuck mechanical transmission veneer peeling machine that is automatically controlled after computer programming. Veneer peeling machine with the remaining wood core of the card-shaft rotary cutting

Narrow plywood is a three-layer or multi-layered board that is cut into veneers by a wood veneer peeling machine or cut into thin wood and glued with adhesive. Usually, odd-numbered veneers are used and adjacent The fiber direction of the layer veneers is vertically glued to each other.In a broad se