English 
 |
| Size: | |
|---|---|
| Closing Size: | |
| Quantity: | |
Plywood Production Automatic Veneer Stacker Machine
 Plywood machine : veneer stacker Automatic veneer stacker takes the veneers from the rotary veneer peeling machine and stacks them according to size. This machine is used for 1mm-4mm veneer stacking, the fastest can reach 80m / min. Saving labour cost. Without automatic veneer stacker, commonly need 2 persons for manual works to pile the cut veneer up. With this machine, the labour cost is saved and working efficiency increased. |
1. The veneers will be collected by a table lift and fed out by a motorized chain conveyor or roller type conveyor.
The conveyor length and direction depend on the buyer's demands.
2.Professional. Automatic veneer stacker is specially designed for plywood or veneer production line industry.
3.High quality, the machine has been tested and upgraded several time, production sill mature and quality guaranteed
4.High working efficiency. The machine installed after veneer clipper and pile the cut veneer automaticlly, with high working efficiency than manual works
5.Saving labour cost. Without automatic veneer stacker, commonly need 2 persons for manual works to pile the cut veneer up. With this machine, the labour cost is saved and working efficiency increased.
All of our plywood machines can be customized according to your production requirment.
Pre-sale services:
1) Provide the free consultation of the equipment
2) Provide the standard device and the flow chart
3) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
4) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging
4) Door to door service is possible
Over 20 years of development
Located in Linyi City, Shandong Province,
One of the largest wood-based panel production bases in China.
The main products include: rotary cutting machine, log rounding machine, veneer stacker, knife sharpener and dryer and other related equipment. And our company can provide customers with a complete set of plywood production solutions according to customer needs.
Plywood Production Automatic Veneer Stacker Machine
 Plywood machine : veneer stacker Automatic veneer stacker takes the veneers from the rotary veneer peeling machine and stacks them according to size. This machine is used for 1mm-4mm veneer stacking, the fastest can reach 80m / min. Saving labour cost. Without automatic veneer stacker, commonly need 2 persons for manual works to pile the cut veneer up. With this machine, the labour cost is saved and working efficiency increased. |
1. The veneers will be collected by a table lift and fed out by a motorized chain conveyor or roller type conveyor.
The conveyor length and direction depend on the buyer's demands.
2.Professional. Automatic veneer stacker is specially designed for plywood or veneer production line industry.
3.High quality, the machine has been tested and upgraded several time, production sill mature and quality guaranteed
4.High working efficiency. The machine installed after veneer clipper and pile the cut veneer automaticlly, with high working efficiency than manual works
5.Saving labour cost. Without automatic veneer stacker, commonly need 2 persons for manual works to pile the cut veneer up. With this machine, the labour cost is saved and working efficiency increased.
All of our plywood machines can be customized according to your production requirment.
Pre-sale services:
1) Provide the free consultation of the equipment
2) Provide the standard device and the flow chart
3) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
4) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging
4) Door to door service is possible
Over 20 years of development
Located in Linyi City, Shandong Province,
One of the largest wood-based panel production bases in China.
The main products include: rotary cutting machine, log rounding machine, veneer stacker, knife sharpener and dryer and other related equipment. And our company can provide customers with a complete set of plywood production solutions according to customer needs.
